Alpha Pro Tech
Rex SynFelt is a high-strength woven fabric that is 20 times stronger, 10 times lighter and 33 percent wider than 30-pound felt. Rex SynFelt can be left exposed for six months with no degradation. The light grey surface reduces working temperatures by as much as 10-12 percent.
ATAS offers two different underlayment systems for metal roofing. ATA-Guard is a polyolefin based, 100 percent asphalt free, high strength underlayment with a slip-resistant surface, designed for use on steep sloped roofs as an alternative replacement for traditional roofing felt. ATA-Shield is an 40 mil thick, slip resistant synthetic polymer surfaced, self-adhering underlayment designed specifically for use under metal roofing. This membrane is well suited for use where a water resistant barrier and heat resistance are required.
WIP 300HT is a self-adhering underlayment developed specifically for use under metal surfaces. WIP 300HT is a 40-mil, high tensile strength, rubberized asphalt underlayment designed to withstand temperatures up to 250 degrees. The rubberized asphalt is laminated to an impermeable polyethylene film layer, making WIP 300HT a superior waterproofing underlayment that provides dual-barrier moisture protection and withstands the most extreme weather conditions, resulting in permanent protection and low life-cycle costs.
Derived from recycled tire crumb rubber, StrongSeal contains an extremely high percentage of post-consumer recycled material and is 100 percent recyclable. It is asphalt free and delivers exceptional waterproofing performance over traditional asphalt based products. Its one-year exposure, high-temperature resistance and low-temperature flexibility make StrongSeal easy to install in a wide variety of construction conditions.
Titanium synthetic roofing underlayments are highly engineered and offer unrivaled performance and premium protection. The new Titanium UDL-25 Plus has all the features you expect from Titanium, including the unique Sure-Grip ridged walking surface plus the new Diamond-Plate slip-resistant coating technology. Titanium UDL-30 now offers easier installation under metal roofing with the use of 3/8 x 1 inch (or longer) roofing nails. With this revolutionary technology, UDL-30 and UDL-50 are now treated with a unique slip resistant coating technology for better walk-ability on sloped roofs.
Kirsch Building Supply
Developed by a roofer, for roofers, patented Sharkskin underlayments have been engineered to exceed industry standards for long-term moisture protection and durability for all steep-slope applications. Specifically manufactured for metal roofing, Ultra and Ultra SA offer 12-month UV exposure and are designed for the high temperatures applications common under metal roofing. Ultra and Sharkskin Comp can be installed with 3/8-inch standard roofing nails, so no plastic caps are required. Ultra SA is like no other self-adhered, high strength, synthetic underlayment on the market, utilizing a no VOC, high-strength ultra-bond adhesive.
Brings European roofing underlayment technology to North American market. Proven, easy to apply, synthetic underlayments for sloped roofing applications. 25-year warranty. Lightweight peel-and-stick membranes for tile and metal roofing called MT, as well as all-purpose mechanically fastened, multi-layer underlayments called UDLX, which incorporate high friction top layer
SDP Advanced Polymer Products
Palisade synthetic underlayment features category leading Stronghold wet surface skid resistant technology for superior applicator safety under wet/dusty installation conditions. Palisade utilizes advanced woven PP high-strength construction, and Kool Blue (eight times cooler than felt) non-glare surface technology and delivers six months UV/wind/rain exposure and 300 degrees temperature rated performance. Palisade-SA-HT is a high-temperature (250 degrees) self-adhered underlayment with Stronghold wet surface skid resistant Kool Blue surface technology and six-month UV exposure.
LeakBarrier PS200 MU Ice and Water Armor is a self-adhesive, glass-fiber reinforced, modified bituminous underlayment especially for metal roofing. Two key attributes of a metal roofing underlayment are that it slides under the metal roof without scratching it; and is tolerant of the high temperatures often reached beneath a metal roof. PS200 MU offers both of these features. The upper side is made of a nonabrasive polyolefinic film with anti-skid properties for good walkability.
View the complete 2010 the idea book Product Guide. Or choose a category from this list: Vertical Panels | Natural Metals | Metal Shingles | Underlayments | Components | Fasteners | Jobsite Equipment | Solar