Vertical panels – 2011 idea book

The Idea Book VI - Vertical Panels
ATAS
Central States Manufacturing
Drexel

ATAS International

ATAS offers four different standing seam products. Dutch Seam and Monarch Batten Seam are structural continuous standing seam panels with different styles of integral seams. Offered in many different seam heights, the Field-Lok is a standing seam system that must be mechanically seamed in the field. The PC System is a non-structural standing seam system where the seam is snapped over the clips and fasteners, concealing the fastening system.
Learn more >

Central States Manufacturing

Central States manufactures quality metal building components for the post-frame, light gauge, architectural/residential and commercial markets. Product offerings include both exposed and concealed fastener panel profiles, as well as trapezoidal standing seam panels in a selection of gauges, colors and warranties. Trim and purlin also are available. Locations include Lowell, Ark.; Michigan City, Ind.; Cedar Hill, Texas; Jasper, Ala.; and Mount Airy, N.C.
Learn more >

Drexel Metals

Since 1985, Drexel Metals has evolved into one of the leading companies in the metal roofing industry focused on the regional manufacturing of metal roof systems. Choose from 32 fully engineered roof assemblies using 13 different metal roof profiles and more than 30 PVDF colors. Drexel is leading the way by offering certification of its installation contractors, robust weather tightness warranties and a full product line of sustainable metal roofing products and practices.
Learn more >

Everlast Roofing
Garland Co
MBCI

Everlast Roofing

Everlast uses the technique of heat forming™ panels and introduced the Evercure® Process. This process includes the CECI enhancement that not only seals the metal’s cut edge, but also protects it from natural and commercial corrosive elements. Everlast’s panels are stronger, more durable, and less likely to crack over time. Everlast trusts the Evercure® Process will continue to set the standard for quality metal building supplies.
Learn more >

The Garland Co

The R-Mer Span structural standing seam roof system is engineered to be architecturally pleasing, as well as to withstand the most severe weather conditions. The R-Mer Span system provides the inherent long-term durability of metal with mechanically curved and tapered design capabilities to meet unique roofing conditions. The system’s symmetrical design with seam cap provides the highest rated resistance to wind uplift in the industry, while its unique one-piece clip allows for unlimited thermal expansion and contraction.
Learn more >

MBCI

MBCI offers two types of standing seam metal roof systems: vertical leg structural and trapezoidal structural. Vertical options are the LokSeam, BattenLok HS, SuperLok and Curved BattenLok. The vertical standing seam roof systems have earned several UL uplift ratings, assuring reliability of performance and provide flexibility to meet design challenges. Trapezoidal options are the Ultra-Dek and Double-Lok. Both were designed for strength, durability and weatherability. They can be installed before or after the exterior walls are in place.
Learn more >

McElroy
Met-Fab
Petersen Aluminum

McElroy Metal Inc

McElroy’s product selection includes a broad variety of architectural, structural and thru-fastened systems used on residential, commercial and architectural projects. To meet the growing demand for radius systems, McElroy offers three standing seam panels that can be curved. McElroy also offers solar systems. Standing seam products are an ideal host for both crystalline and thin-film solar technologies.
Learn more >

Met-Fab

Met-Fab manufactures the Historic Panel in continuous lengths to achieve the ultimate in watertight panel integrity. A finished seam of 1 inch or 1-1/2 inches, with variable width panels, will provide the flexibility desired. Like all Met-Fab products, the Historic Panel features a PVDF paint, which carries a 20-year finish warranty.
Learn more >

Petersen Aluminum

PAC-Clad is a versatile prefinished sheet metal coating (PVDF) applied to both G-90 galvanized steel and 3105-H14 aluminum. Each Petersen roll former provides panels that have been Herr-Voss corrective leveled. Standing seam, flush and soffit panels are available up to 50 feet. Matching flashing and trim is available factory formed or field formed from Pac-Clad material.
Learn more >

Sheffield
VP Buildings

Sheffield Metals

CoolR steel or aluminum is ideal for applications such as copings, gravel stops, flashings, mansards, fascias, soffits, standing seam, batten seam and flat seam roofing applications. It is comprised of Structural Grade 50, extra smooth, ASTM A-792 Galvalume steel or aluminum sheet, coated with a PVDF coating, of 1.0 ± 0.1 mil total dry film thickness including primer. The reverse side is coated with a primer and off white backer with a total of .5 mil dry film for additional protection.
Learn more >

VP Buildings

The SLR II standing seam architectural/structural metal roofing system is a low-slope, concealed-fastener roof that meets most architectural performance specifications. Using factory-installed sealant, pre-caulked galvanized clips and field-seaming, this roof system provides unsurpassed performance and leak resistance. Panels are available in 22- or 24-gauge Galvalume steel. The thermally responsive galvanized panel clip combines a 22-gauge hook and a 16-gauge clip.
Learn more >

/ Vertical Panels / Exotic Metals / Metal Shingles / Underlayments
/ Components / Fasteners / Jobsite Equipment / Solar / Paints

Related Posts:

COMMENT