AMSI manufactures a wide selection of high-quality standing seam clips: snap-batten clips, snap-lock clips, fixed clips, sliding clips, Bermuda clips and more. AMSI manufactures Ultra Seam standing seam metal roofing (including curved panels), agricultural panels, flush soffit panels and wall panels for both the commercial and residential market. AMSI offers custom flashings manufactured up to 21 feet, as well as chimney caps, custom bay tops, batten caps and fabrications up to 18 gauge. Products are available in galvanized, Galvalume, PVDF, silicone polyester, zinc, copper, stainless steel and TCS II.
The 12×1-1/4-inch Stainless T-17 #25 Torx Truss Head (rounded head) fastener is similar to the 12×1-1/4-inch S/S T-17 #25 Torx clip screw but is now available with a rounded edge around the outer top rim. The primary market for this screw is when a finished look is needed on the company’s typical clip screw. Applications would include exterior architectural, colored acoustical panels and curtain wall systems that require a stainless steel finished fastener. The 14×1-1/8-inch U-Seal T-1 Self Drilling is designed to be used with the company’s Dyna-Flash pipe flashings for metal roofs. The T-1 point is best suited for fastening into a metal roof. The extra 1/4 inch of length, compared to the standard 7/8 inch, will better allow for the thickness of the outer ring of the Dyna-Flash and for the necessary sealant that goes under the ring.
East Coast Fasteners
The Ply-Lo 410 is for attaching Galvalume and other long-life roof panels, including PVDF-painted panels, to wood frame buildings. Manufactured from 410 stainless steel and coated with 1,000-hour salt spray resistant Ultraseal, the 410 provides 20 years of protection against red rust. The 304 stainless steel bonded sealing washer provides lifetime protection from red rust. The vulcanized bonding of the washer eliminates separation of EPDM from the metal backing.
The company boasts the fastener industry’s first “long-life” powder coating warranty to match WeatherX, Spectracote and Perspectracote paint systems. Leland manufactures a complete line of fasteners for metal roofing, wood frame or steel frame projects, offering self-drilling and self-tapping fasteners in lengths to 4 inches in Nos. 10-12 and 14 diameters. Lengths up to 8 inches are also available. Leland fasteners are made of carbon or stainless steel, plated, coated or powder coated to match panel colors. Leland’s powder coating covers both the head and under the head where corrosion starts.
Levi’s Nails & Screws
Levis Nails & Screws offers many different kinds of metal roofing screws including post-frame screws, self drillers, stainless steel screws for aluminum panels, pancake head screws, stainless steel cap screws and wafer head screws. All are available color matched to any panel color.
Precision Fasteners & Components
Precision offers a full selection of top quality roof clips for all panel types, as well as bearing plates, stamped at its facility in Clearwater, Fla. Precision offers a complete line of top-rated fasteners for the metal roofing professional, including standing seam clip screws to fit all requirements: plates, coated and stainless.
Patented S-5! clamp technology makes attaching ancillary items to standing seam roofs simple, quick and dependable. Use S-5! utility clamps to attach signs, HVAC equipment, solar panels, roof dormers, roof walks, satellite dishes, equipment screens, gas piping, snow retention products and more without violating the integrity of the roof. S-5! products look great, install easily, last as long as the roof and cost less than the alternatives.
Sealtite manufactures steel-frame and post-frame screws for agricultural, commercial, industrial and residential metal roof applications. Product strengths are drill quality, showcased on the Maxx Steelbinder drill screw and Kwikseal II post-frame screw and corrosion resistance. Both products are greatly enhanced by Sealtite’s mechanical zinc plating and new powder coat paint process. Solid and vented foam closure strips, pipe flashings, Pancake & Wafer head screws for standing seam roofs and other accessories round out the product line.
RoofClamp secures roof accessories on metal roofs by clamping to the seams without penetrating the roof. RoofClamp is available in two styles — RoofClamp RC and RoofClamp RCT. They can be used to install roofing components such as service walks, satellite dishes, HVAC equipment, pipes/conduit, signage and photovoltaic solar modules.
Triangle Fastener Corporation
Triangle Fastener provides a full line of standard and specialty fasteners, tools, sealants and accessories for the commercial construction industry. Triangle’s new Need-It-Now products for metal roofing consolidates products and services so you have immediate access to a wide variety of items from our 23 locations. Triangle offers Concealor clip screws, Blazer drill screws and Panel-Tite post-frame screws, painted fasteners, rivets and closures as well as jobsite support, technical assistance and product development. Ask about the Pak-One job pack programs.
Find a solution for all your fastener needs. Or choose a category from this list: Vertical Panels | Natural Metals | Metal Shingles | Underlayments | Components | Fasteners | Jobsite Equipment | Solar View the complete 2010 Idea Book Product Guide.