Before its amazing transformation, Hanover Square in Hanover Park, Illinois, was a failing, barely 50 percent-leased strip center with few redeeming qualities. “It was completely run-down and had to have been one of the least attractive strip centers in the area,” said David Cornes, principal at David Cornes Architect in Chicago.
One constraint Cornes faced in designing the renovation was that the center was very long and low—1,400 linear feet with only 12-foot ceilings. “A major design goal was to articulate the front façade and make the structure appear more than it was,” Cornes said.
Approximately 10,000 square feet of Petersen’s Precision Series HWP wall panels were selected as the primary cladding. The 24-gauge steel, 16-inch panels were finished in Medium Bronze. An additional 6,800 square feet of PAC-3000 RS metal composite material (MCM) wall panels accent and highlight the façade. The 4mm MCM rainscreen system panels were finished in White.
Installation of the Petersen panels was completed by Anthony Roofing Tecta America in Aurora, Illinois “The job was originally spec’d using a competitive product and there had been some delays in the early stages of the project,” said Gianni Pellegrinon, sales and project manager. “But when we got involved, we suggested looking at Petersen. We worked closely with the architect to get the most efficient layout in order to stay within the tight budget.”
Architect David Cornes confirmed that the construction process had been long and drawn-out. “There was a change of general contractors mid-stream and that really delayed things,” Cornes noted. “But when Novak Construction got involved as GC, things went pretty smoothly. Novak and Anthony Roofing really rescued the job.” Novak Construction is located in Chicago.
Both PAC-CLAD profiles were fabricated at Petersen’s headquarters facility in Elk Grove Village, Illinois
Petersen manufactures PAC-CLAD metal cladding products in multiple gauges of steel and aluminum. PAC-CLAD products include standing-seam roof panels, hidden- and exposed-fastener wall panels, flush panels, soffit panels, perforated metal, fascia and coping systems, composite panels, column covers, coil and flat sheet. All are available in full 70 percent PVDF finish (Kynar) in 45 standard colors that include a 30-year finish warranty. Most colors meet LEED and Energy Star requirements, and are rated by the Cool Roof Rating Council. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland and Minnesota. For information on the complete line of Petersen metal products call 800-PAC-CLAD, visit pac-clad.com or write to email@example.com.